x

Multicraft Technology

Download PDF

Academic Programs

Multicraft Technology - Associate in Applied Science (061)

(061) Associate in Applied Science

Graduates of the Multicraft Technology program are prepared to enter the work force as engineering technicians, field service engineers, plant maintenance technicians and application engineers or to move into supervisory positions. Graduates may continue their education at many colleges and universities and earn an advanced degree. Multicraft technicians combine knowledge of mechanical engineering technology with knowledge of electrical and electronic circuits to maintain, design, develop, test, and manufacture electronic and computer-controlled mechanical systems, such as robotic assembly machines. They also operate these machines in factories and other work sites. Maintenance technicians will work independently and with other plant personnel to perform preventative, predictive and routine maintenance tasks. They will troubleshoot issues, repair failures of production and facilities equipment, and ensure maximum equipment efficiency and effectiveness. Their work often overlaps that of both electrical and electronic engineering technicians and mechanical engineering technicians. The program content is constantly updated so that students stay current and competitive in today's market place. This degree allows the student to choose electives towards one student-selected specialization in Alternative Energy**, Electrical, Electronics, HVAC, or Welding. Graduates of the program may pursue certification in their field.

Work and Employment

Graduates of this program are prepared to work in industry, instrumentation, design, field service, and service laboratories. Graduates may supervise technicians in the assembly, installation, repair, maintenance, calibration, and modification of electro-mechanical systems and robotics.

Sauk has formed partnerships with local manufacturers to offer paid internships for students in the Multicraft program. Visit https://www.svcc.edu/academics/programs/manufacturing-technology/multicraft-technology/meip.html for details.

Special Considerations

Workers usually have the following skills and aptitudes: the ability to do precise and detailed work, use good eye-hand coordination, notice and compare differences in objects, have mathematical and mechanical aptitudes, are analytic, curious and creative.

Program Contacts at Sauk Valley Community College
Academic Advising, 815/835-6354
Scott Gillihan, Instructor of Welding, 815/835-6278
Steven McPherson, Associate Professor of Electronics/Technology, 815/835-6347.
Jeff Johnson, Multicraft Instuctor, 815/835-6572

Follow this link for career information.


Total Hours Required - 63 Hours

Major Field Requirements - 46-47 Hours

  • ELECTIVES 9 SEMESTER HOUR(S) - SEE AREA EMPHASIS ELECTIVES BELOW FOR CHOICES. CHOOSE ONE EMPHASIS
  • EET110 - Intro to Digital Electronics ( 4 Semester Hours)

    A basic course in electronic logic circuitry. This course will introduce the student or experienced technician to digital logic circuits. Basic logic elements such as AND, OR, NAND and NOR gates will be introduced and characterized. Combinational logic circuits will be designed and analyzed in the lab. Semester hour(s): 4 Lecture/Lab Hours: 3 lec, 2 lab/week

  • EET245 - Programmable Controllers ( 3 Semester Hours)

    This course will cover both PLC programming and using the PLC as a troubleshooting device. Relay-type instructions, timer and counter operations, math and data compare instructions will be discussed. The course will also cover forcing commands as well as an introduction to the RSLogix 500 programming software. The primary PLCs used in this class will be Allen Bradley/SLC 500 series. More advanced programming instructions will be covered such as sequencers and shift registers and jump instructions. The course will use the RSLogix 500 programming software as the primary programming software. Prerequisite: EET 110 with a grade of ""C"" or higher. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • ELT120 - Fund of Elec w/ Applied Math ( 3 Semester Hours)

    This course provides basic electricity fundamentals, basic control strategies and electrical symbols. The class will provide the student with an understanding of basic electrical theory, schematic and wiring diagram symbols, motor theory, wiring and electrical troubleshooting. Conventional current will be used to define current flow. Applied mathematical concepts are incorporated into the course as required for successful understanding of objectives. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    OR

    EET107 - Intro to DC and AC Circuits ( 4 Semester Hours)

    A beginning course in electronics that provides the student with the fundamentals needed in advanced electronics courses. Instruction is provided in the basic laws of direct and alternating current circuit theory and the operation of electronic devices and circuitry. Emphasis is placed upon the operation of electronic test equipment which is utilized in practical laboratory application. Prerequisite: MAT 074 with a grade of ""C"" or higher. Semester hour(s): 4 Lecture/Lab Hours: 3 lec, 2 lab/week

     
  • ELT259 - Industri & Agricultur Wiring ( 3 Semester Hours)

    This course is a study of industrial and agricultural electrical systems. Emphasis will be placed on installation and troubleshooting of motor and electrical distributions. Prerequisite: ELT 120 or EET 107 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • ELT262 - Electrical Controls ( 3 Semester Hours)

    Provides the student with sufficient knowledge so that the person is proficient in the installation, servicing and maintenance of the controls used in industry and home. Prerequisite: ELT 101 or ELT 120 or EET 107 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • IND108 - Introduction to CAD ( 2 Semester Hours)

    An introduction to engineering design and graphics using the latest version of AutoCAD. Basic AutoCAD commands will be introduced and emphasized throughout this course. Development of technical drawing skills including: design problems, sketching, dimensioning, tolerancing, orthographic projection, sectional views, and other viewing conventions. The course will proceed from the basics of design and sketching to applications used in preparing detail and assembly drawings. None Semester hour(s): 2 Lecture/Lab Hours: 1 lec/2 lab

  • IND118 - Mechanical Systems ( 3 Semester Hours)

    The course will contain all information needed for a maintenance technician to successfully perform at a high level in their job. The course material will cover mechanical systems focusing on analysis of mechanical components, their relationships to each other, and failure prediction. General rigging will also be covered. Prerequisite: EET 107 (may be taken concurrently) or ELT 120 (may be taken concurrently). 3 Semester hour(s) Lecture/Lab Hours: 2 lec, 2 lab/week

  • IND125 - Machining & Manufacturing Proc ( 3 Semester Hours)

    This course is an examination of the use and capabilities of the major machine tool groups, including foundry, their use in industry and the problems and properties of metal fabrication associated with each type. This is a manufacturing technique and basic machining course. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • IND131 - OSHA Standards ( 1 Semester Hours)

    Provides students with information regarding basic safety principles in industry. A brief overview of the Occupational Safety and Health Administration (OSHA) will be discussed. The primary focus will be on OSHA regulations and standards that pertain to the construction and maintenance of industrial electro-mechanical systems. Semester hour(s): 1 Lecture/Lab Hours: 1 lec. week

  • IND218 - Fluid Power ( 3 Semester Hours)

    This course will combine the operating fundamentals of hydraulic and pneumatic controls and operations. Students will read and interpret prints using proper symbols and documentation. Students will be able to design and assemble a complete fluid power system using the correct calculations for proper sizing of equipment. Prerequisite: ELT 120 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • IND239 - Industrial Communications ( 3 Semester Hours)

    This course will introduce the fundamentals of industrial networks. Topics covered will include WANs, LANs, PANs, topologies, communication protocols, cabling, wired and wireless communications, and SCADA. Additional topics may be introduced to keep content current in this rapidly changing area. Lab activities will be included to provide ""hands-on"" experience with equipment. Prerequisite: EET 110 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • IND250 - Industrial Internship ( 1-3 Semester Hours)

    Participation in a work experience in an area of technology under supervision of both the college and an employer. Internship objectives will be identified for each student enrolled Prerequisite: Twelve semester hours in major field and consent of instructor. 1-2-3 Semester hour(s) Repeatable: This course is repeatable three times for a maximum of twelve credits. Lecture/Lab Hours: 5-10-15 hours internship/week

  • WLD102 - Shielded Metal Arc Welding ( 3 Semester Hours)

    This course introduces the fundamental theory, safety practices, equipment, and techniques required for shielded metal arc welding (SMAW) in the flat, horizontal, vertical, and overhead positions. Qualification tests in flat, horizontal, vertical and overhead positions are used in the evaluation of student progress toward making industrial standard welds. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • WLD106 - Welding Fundamentals ( 2 Semester Hours)

    This course is designed to provide students with a thorough understanding of the basics of Metal Inert Gas (MIG) arc welding fundamentals, also referred to as Gas Metal Arc Welding (GMAW) and stick welding, also referred to as Shielded Metal Arc Welding (SMAW) including the following topics: welding safety, power sources, and wire feeders, machine set up, adjustment and maintenance, identification of welding defects and quality welds, and welding techniques. Training to develop the manual skills necessary to make high quality MIG and SMAW welds is included with emphasis placed in the areas of various joint configurations, single pass, multiple pass, fillet, groove, overlap welds in a flat position. Oxyacetylene cutting equipment setup and safety will also be emphasized. Semester hour(s): 2 Lecture/Lab Hours: 1 lec, 2 lab/week

General Education Requirements - 16 Hours

  • Communications 6 Semester hour(s)
  • Humanities/Fine Arts 3 semester hour(s)
  • Social/Behavioral Science 3 Semester hour(s)
  • Physical Science (PHY 175 Required) 4 Semester hour(s)

SVCC Degree Requirement - 1 Hours

  • FYE101 - First Year Experience ( 1 Semester Hours)

    This course is designed to facilitate the self-development of the student, and introduce students to the expectations of the college community. This course reviews the academic skills that promote success during their college career. Topics will include, but not limited to, identifying campus/community resources, test-taking strategies, career exploration/decision making, problem solving, literacy, and critical thinking. Students will also learn strategies for taking personal responsibility for their academic and career choices. (Students in good standing (GPA of 2.0 or higher), who have accumulated 16 semester hours or more prior to enrolling as a degree seeking student at Sauk are not required to take this class). Semester hour(s): 1 Lecture/Lab Hours: 1 lec/week

Electives for Alternative Energy Emphasis - 9 Hours

  • ENE102 - Small Wind Energy ( 3 Semester Hours) **

    This course provides an introduction to the field of small wind energy. Installation and theory of small wind turbines designed for industrial and residential use will be examined. Labs will provide students with hands-on experience installing and troubleshooting small wind installations. Prerequisite: ELT 120 or EET 107 3 Semester hour(s) Lecture/Lab Hours: 2 lec, 2 lab/week NOTES: **THIS COURSE IS NOT CURRENTLY OFFERED.

    ** THIS COURSE NOT CURRENTLY OFFERED.

  • ENE135 - Renewable Energy ( 3 Semester Hours) **

    This course covers the different forms of renewable energy and how they are used. The class will cover the basics of solar energy, solar photovoltaics, bioenergy, hydroelectricity, tidal power, wind energy, wave energy, and geothermal processes. Prerequisite: EET 107 or ELT 120.or consent of instructor. 3 Semester hour(s) Lecture/Lab Hours: 3 lec/week NOTES: **THIS COURSE IS NOT CURRENTLY OFFERED.

    ** THIS COURSE NOT CURRENTLY OFFERED.

  • ENE140 - Solar Thermal Energy ( 3 Semester Hours) **

    This course will cover the basic theory of heat transfer and the principles of solar energy devices available and how they evolved. The course will touch upon residential, commercial and industrial applications. ELT 120 or concurrent enrollment in ELT 120 or consent of instructor. 3 Semester hour(s) Lecture/Lab Hours: 2 lec, 2 lab/week NOTES: **THIS COURSE IS NOT CURRENTLY OFFERED.

    ** THIS COURSE NOT CURRENTLY OFFERED.

  • ENE145 - Geothermal Energy ( 3 Semester Hours) **

    This course covers the theory of geothermal heating and cooling, design and installation. Heat transfer will be studied and the different modes involved in a geothermal system. Different designs and control strategies will be explored along with the advantages and disadvantages of each. Residential, commercial, and industrial systems will be covered. Prerequisite: ELT 120 or concurrent enrollment in ELT 120 or consent of instructor. 3 Semester hour(s) Lecture/Lab Hours: 2 lec, 2 lab/week NOTES: **THIS COURSE IS NOT CURRENTLY OFFERED.

    ** THIS COURSE NOT CURRENTLY OFFERED.

Electives for Electrical Emphasis - 9 Hours

  • EET252 - Industrial Electronics ( 3 Semester Hours)

    A study of industrial control systems based on an input-decision-output analysis. Special concern is taken in areas where small control signals must be amplified to meet high power output requirements. Some of the topics covered will include photoelectric inputs, reduced voltage starting SCR applications, thermo electronics, hall effect sensors, solid-state relays and electronic motor control. Prerequisite: EET 107 or ELT 120 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • ELT101 - Electrical Wiring ( 3 Semester Hours)

    Students will be introduced to basic electrical wiring as it applies to residential occupancies, placing special emphasis on National Electric Code requirements. Students will develop an understanding of Ohms Law and be taught to wire series and parallel circuits; install single-pole, three-way and four-way switches, duplex receptacles and service panels; and troubleshoot circuits. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • ELT261 - National Electric Code ( 3 Semester Hours)

    A study of National Electric Code specifications with emphasis placed on proper installation of all circuits. Prerequisite: ELT 101 or ELT 120 OR EET 107 Semester hour(s): 3 Lecture/Lab Hours: 3 lec/week

  • IND219 - Industrial Troubleshooting ( 3 Semester Hours)

    Students will learn to systematically troubleshoot equipment and control systems used in industry. This course will start with analyzing troubleshooting theory and flowcharts and evolve into actual hands-on troubleshooting of simulated industrial machinery. Prerequisites: ELT 120 or EET 107; ELT 262, and EET 245 with a grade of ""C"" or higher or competency test with a grade of 80% or higher. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

Electives for Electronics Emphasis - 9 Hours

  • EET107 - Intro to DC and AC Circuits ( 4 Semester Hours)

    A beginning course in electronics that provides the student with the fundamentals needed in advanced electronics courses. Instruction is provided in the basic laws of direct and alternating current circuit theory and the operation of electronic devices and circuitry. Emphasis is placed upon the operation of electronic test equipment which is utilized in practical laboratory application. Prerequisite: MAT 074 with a grade of ""C"" or higher. Semester hour(s): 4 Lecture/Lab Hours: 3 lec, 2 lab/week

  • EET207 - Advanced Circuits ( 3 Semester Hours)

    An advanced course in circuit analysis and troubleshooting. This course will build on the fundamentals from EET 107. Circuit analysis and the use of schematics and test equipment will be examined from a technician's point of view. Prerequisite: EET 107 with a grade of ""C"" or higher. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • EET218 - Microprocess Architecture Apps ( 4 Semester Hours)

    A technician level course in microprocessor circuitry leading to an understanding of systems utilizing VLSI, CPUs, and peripherals. The architecture of the MC68HC11 microcontroller will be examined and used as the vehicle to define basic concepts. Students will investigate input-output control, bus interfacing and memory architecture through programming and troubleshooting of MC68HC11 systems. Prerequisite: EET 110. Semester hour(s): 4 Lecture/Lab Hours: 3 lec, 2 lab/week

  • EET261 - Adv Programmable Controllers ( 3 Semester Hours)

    This is an advanced course in programmable controllers. The course will be applicable to all modern industrial controllers. The course will cover PLC programming, including advanced programming instructions, networking instructions and applications. Products and processes used to collect information to document and analyze productivity through the use of accurate, versatile, and reliable electronic equipment that range from simple recorders to computer systems will be introduced. SCADA (Supervisory Control and Data Acquisition) systems and interfacing techniques using Remote Terminal Units (RTU) or other commercial modules will be covered. The use of robotics will be introduced. Prerequisite: EET 245 with a grade of ""C"" or higher. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • EET299 - Spec Topics in Electronics ( 1-3 Semester Hours)

    Application of electronics principles to specific problems through case studies, simulation, special projects or problem-solving procedures. No topic/issue can be offered more than twice in three years. This course is repeatable two times for a maximum of 9 credits. Topic to be listed on the student's permanent academic record. Semester hour(s): 1 to 3 Repeatable: This course is repeatable two times for a maximum of 9 credits. Lecture/Lab Hours: 1, 2 or 3 lec/2, 4, or 6 lab/week

Electives for HVAC Emphasis - 9 Hours

  • HRS114 - Sheet Metal Fabrication ( 3 Semester Hours)

    The students will obtain a working knowledge of layout and fabrication of common fittings used today. The student will learn how to use the tooling in a sheet metal shop safely and efficiently. This is a basic class and does not go into advanced layout procedures. Semester hour(s): 3 Lecture/Lab Hours: 1 lec, 3 lab/week

  • HRS120 - Basic Refrigeration ( 3 Semester Hours)

    This course will allow the student to become proficient in the use of tools and proficient in the correct materials to use for a given task. The tools will be specific to air conditioning operations for proper operations of components and system performance. Prerequisite: ELT 120 (may be taken concurrently) or EET 107 (can be taken concurrently) or consent of instructor. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • HRS130 - Basic Heating ( 3 Semester Hours)

    This class covers the basic residential forced air heating system. The class will address basic concepts involved in the combustion process for safe operation of a home forced air heating system. Furnace components and parts will be studied and how to properly hook components together for safe and efficient operation. The class will explore different furnace efficiencies and how they differ. Prerequisite: ELT 120 or EET 107 or consent of instructor. 3 Semester hour(s) Lecture/Lab Hours: 2 lec, 2 lab/week

Electives for Machining Emphasis - 9 Hours

  • IND203 - Adv Machining & Manufac Proc ( 3 Semester Hours)

    An examination of the use and capabilities of the machine tool groups. An advanced course for students wishing to have a comprehensive knowledge of machine shop operations in terms of set-up, machine feeds, tool and cutter sharpening, and electrical discharge machining. Prerequisite: IND 125 or consent of instructor. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • IND207 - Computer Numerical Cont Prog I ( 3 Semester Hours)

    This Computer Numerical Control Programming I course is designed to introduce to students the various processes involved in programming a CNC machine. Setting data points, programming different milling events, set-up functions, and repeat functions will be examined. This course is designed to prepare students who are looking for a position in the metalworking industry. Prerequisites: IND 203, or consent of instructor. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • IND208 - Comp Numerical Control Prog II ( 3 Semester Hours)

    This course will build on the CNC programming knowledge and skills learned in IND 207 - Computer Numerical Control Programming I. Students will be expected to program more advanced CNC machining processes, as well as identify the various types of CNC machines and programming functions used outside of the classroom. Industry tours will be a part of the course to give students a basic understanding of the diversity of types and uses of CNC machines. Prerequisite: IND 207. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

Electives for Welding Emphasis - 9 Hours

  • WLD101 - Industrial MIG Welding ( 2 Semester Hours)

    This course is designed to provide students with a thorough understanding of arc welding fundamentals including: welding safety, MIG welding, blueprint reading, welding symbols, AWS 14.3 welding standard, oxyacetylene cutting, air carbon arc, reclaim welding and cutting. Training to develop the manual skills necessary to make high quality MIG welds is included with emphasis placed in the areas of various joint configurations, single pass, multiple pass, fillet, and groove, overlap welds in flat and horizontal position. Oxyacetylene welding and cutting equipment setup and safety will also be emphasized. Semester hour(s): 2 Lecture/Lab Hours: 1 lec, 2 lab/week

  • WLD103 - MIG Welding ( 3 Semester Hours)

    This course is designed to provide students with a thorough understanding of the Metal Inert gas (MIG) arc welding fundamentals, also referred to as gas metal arc welding (GMAW), including the following topics: welding safety, power sources and wire feeders, machine setup, adjustment and maintenance, identification of welding defects and quality welds, metal transfer methods, wire selection, shielding gas selection, and testing procedures, Training to develop the manual skills necessary to make high quality MIG welds is included with emphasis placed in the areas of various joint configurations, single pass, multiple pass, fillet, groove, and overlap welds in flat, horizontal, vertical, and overhead positions 3 Semester hour(s) Lecture/Lab Hours: 2 lec, 2 lab/week

  • WLD104 - TIG Welding ( 3 Semester Hours)

    This course is designed to provide students with a thorough understanding of the Tungsten Inert Gas (TIG) arc welding fundamentals, also referred to as Gas Tungsten Arc Welding (GTAW), including the following topics: welding safety, power sources, machine setup, adjustment and maintenance, identification of welding defects and quality welds, filler wire selection, shielding gas selection, testing procedures, other TIG processes including stainless steel and aluminum. Training to develop the manual skills necessary to make high quality TIG welds is included with emphasis placed in the areas of various joint configurations, single pass, multiple pass, fillet, groove, and overlap welds in flat, horizontal, vertical, and overhead positions. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

  • WLD140 - Robotic Welding ( 3 Semester Hours)

    This course is designed to give students hands-on understanding of robotic arc welding. Topics to be covered include safely jogging the robot, setting up welding equipment, robotic welding teach pendent, robotic welding parameters, motion types, programming examples, saving and backing up robot programs and controller files. Students will develop robotic welding programs using robot controllers application software and hardware. Pre-requisite: WLD 103 - MIG Welding or WLD 106 Fundamentals of Welding Co-requisite: WLD 103 or WLD 106 can be taken concurrently with WLD 140 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

Suggested Program (will vary according to emphasis; see an academic advisor for individualized plan.)

First Semester - 15 Hours

  • ELT120 - Fund of Elec w/ Applied Math ( 3 Semester Hours)

    This course provides basic electricity fundamentals, basic control strategies and electrical symbols. The class will provide the student with an understanding of basic electrical theory, schematic and wiring diagram symbols, motor theory, wiring and electrical troubleshooting. Conventional current will be used to define current flow. Applied mathematical concepts are incorporated into the course as required for successful understanding of objectives. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    OR

    EET107 - Intro to DC and AC Circuits ( 4 Semester Hours)

    A beginning course in electronics that provides the student with the fundamentals needed in advanced electronics courses. Instruction is provided in the basic laws of direct and alternating current circuit theory and the operation of electronic devices and circuitry. Emphasis is placed upon the operation of electronic test equipment which is utilized in practical laboratory application. Prerequisite: MAT 074 with a grade of ""C"" or higher. Semester hour(s): 4 Lecture/Lab Hours: 3 lec, 2 lab/week

       
    • EET110 - Intro to Digital Electronics ( 4 Semester Hours)

      A basic course in electronic logic circuitry. This course will introduce the student or experienced technician to digital logic circuits. Basic logic elements such as AND, OR, NAND and NOR gates will be introduced and characterized. Combinational logic circuits will be designed and analyzed in the lab. Semester hour(s): 4 Lecture/Lab Hours: 3 lec, 2 lab/week

    • FYE101 - First Year Experience ( 1 Semester Hours)

      This course is designed to facilitate the self-development of the student, and introduce students to the expectations of the college community. This course reviews the academic skills that promote success during their college career. Topics will include, but not limited to, identifying campus/community resources, test-taking strategies, career exploration/decision making, problem solving, literacy, and critical thinking. Students will also learn strategies for taking personal responsibility for their academic and career choices. (Students in good standing (GPA of 2.0 or higher), who have accumulated 16 semester hours or more prior to enrolling as a degree seeking student at Sauk are not required to take this class). Semester hour(s): 1 Lecture/Lab Hours: 1 lec/week

    • IND108 - Introduction to CAD ( 2 Semester Hours)

      An introduction to engineering design and graphics using the latest version of AutoCAD. Basic AutoCAD commands will be introduced and emphasized throughout this course. Development of technical drawing skills including: design problems, sketching, dimensioning, tolerancing, orthographic projection, sectional views, and other viewing conventions. The course will proceed from the basics of design and sketching to applications used in preparing detail and assembly drawings. None Semester hour(s): 2 Lecture/Lab Hours: 1 lec/2 lab

    • IND118 - Mechanical Systems ( 3 Semester Hours)

      The course will contain all information needed for a maintenance technician to successfully perform at a high level in their job. The course material will cover mechanical systems focusing on analysis of mechanical components, their relationships to each other, and failure prediction. General rigging will also be covered. Prerequisite: EET 107 (may be taken concurrently) or ELT 120 (may be taken concurrently). 3 Semester hour(s) Lecture/Lab Hours: 2 lec, 2 lab/week

    • WLD106 - Welding Fundamentals ( 2 Semester Hours)

      This course is designed to provide students with a thorough understanding of the basics of Metal Inert Gas (MIG) arc welding fundamentals, also referred to as Gas Metal Arc Welding (GMAW) and stick welding, also referred to as Shielded Metal Arc Welding (SMAW) including the following topics: welding safety, power sources, and wire feeders, machine set up, adjustment and maintenance, identification of welding defects and quality welds, and welding techniques. Training to develop the manual skills necessary to make high quality MIG and SMAW welds is included with emphasis placed in the areas of various joint configurations, single pass, multiple pass, fillet, groove, overlap welds in a flat position. Oxyacetylene cutting equipment setup and safety will also be emphasized. Semester hour(s): 2 Lecture/Lab Hours: 1 lec, 2 lab/week

    Second Semester - 13 Hours

    • Social/Behavioral Science 3 Semester hr(s)
    • EET245 - Programmable Controllers ( 3 Semester Hours)

      This course will cover both PLC programming and using the PLC as a troubleshooting device. Relay-type instructions, timer and counter operations, math and data compare instructions will be discussed. The course will also cover forcing commands as well as an introduction to the RSLogix 500 programming software. The primary PLCs used in this class will be Allen Bradley/SLC 500 series. More advanced programming instructions will be covered such as sequencers and shift registers and jump instructions. The course will use the RSLogix 500 programming software as the primary programming software. Prerequisite: EET 110 with a grade of ""C"" or higher. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    • ELT259 - Industri & Agricultur Wiring ( 3 Semester Hours)

      This course is a study of industrial and agricultural electrical systems. Emphasis will be placed on installation and troubleshooting of motor and electrical distributions. Prerequisite: ELT 120 or EET 107 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    • ELT262 - Electrical Controls ( 3 Semester Hours)

      Provides the student with sufficient knowledge so that the person is proficient in the installation, servicing and maintenance of the controls used in industry and home. Prerequisite: ELT 101 or ELT 120 or EET 107 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    • IND131 - OSHA Standards ( 1 Semester Hours)

      Provides students with information regarding basic safety principles in industry. A brief overview of the Occupational Safety and Health Administration (OSHA) will be discussed. The primary focus will be on OSHA regulations and standards that pertain to the construction and maintenance of industrial electro-mechanical systems. Semester hour(s): 1 Lecture/Lab Hours: 1 lec. week

    Summer Semester - 3 Hours

    • WLD102 - Shielded Metal Arc Welding ( 3 Semester Hours)

      This course introduces the fundamental theory, safety practices, equipment, and techniques required for shielded metal arc welding (SMAW) in the flat, horizontal, vertical, and overhead positions. Qualification tests in flat, horizontal, vertical and overhead positions are used in the evaluation of student progress toward making industrial standard welds. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    Third Semester - 15 Hours

    • Elective 3-6 Semester hour(s)
    • ENG101 - Composition I ( 3 Semester Hours)

      A basic course in essay writing with emphasis on exposition, ENG 101 stresses knowledge and application of the rhetorical modes. ENG 101 presupposes competence in grammar, usage, and mechanics. Prerequisite: ACT standard score in English of 22 or above; required scores on the current English placement test, or grade of C or higher in ELA 099. Illinois Articulation Initiative (IAI): C1 900 Semester hour(s): 3 Lecture/Lab Hours: 3 lec/week

    • IND125 - Machining & Manufacturing Proc ( 3 Semester Hours)

      This course is an examination of the use and capabilities of the major machine tool groups, including foundry, their use in industry and the problems and properties of metal fabrication associated with each type. This is a manufacturing technique and basic machining course. Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    • IND218 - Fluid Power ( 3 Semester Hours)

      This course will combine the operating fundamentals of hydraulic and pneumatic controls and operations. Students will read and interpret prints using proper symbols and documentation. Students will be able to design and assemble a complete fluid power system using the correct calculations for proper sizing of equipment. Prerequisite: ELT 120 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    Fourth Semester - 17 Hours

    • Elective 3-6 Semester hour(s)
    • Humanities/Fine Arts 3 Semester hour(s)
    • ENG111 - Bus/Technical Communication ( 3 Semester Hours)

      Provides information on principles of written and oral communication specifically applied to business and technical fields. Assignments are designed to develop skill and practice in the use of these principles and include the writing of memoranda, business letters, instructions, informal reports and formal reports. Students are encouraged to tailor assignments to the specific careers they are pursuing. (Not applicable for humanities requirement.) Prerequisite: ENG 101 with a grade of C or higher. Because of emphasis on graphics and computer formatting, students are advised to complete CIS 109 or IND 105 or to have equivalent word processing skills. Semester hour(s): 3 Lecture/Lab Hours: 3 lec/week

    • IND239 - Industrial Communications ( 3 Semester Hours)

      This course will introduce the fundamentals of industrial networks. Topics covered will include WANs, LANs, PANs, topologies, communication protocols, cabling, wired and wireless communications, and SCADA. Additional topics may be introduced to keep content current in this rapidly changing area. Lab activities will be included to provide ""hands-on"" experience with equipment. Prerequisite: EET 110 Semester hour(s): 3 Lecture/Lab Hours: 2 lec, 2 lab/week

    • IND250 - Industrial Internship ( 1-3 Semester Hours)

      Participation in a work experience in an area of technology under supervision of both the college and an employer. Internship objectives will be identified for each student enrolled Prerequisite: Twelve semester hours in major field and consent of instructor. 1-2-3 Semester hour(s) Repeatable: This course is repeatable three times for a maximum of twelve credits. Lecture/Lab Hours: 5-10-15 hours internship/week

    • PHY175 - Introduction to Physics ( 4 Semester Hours)

      Basic concepts of physics including units in mechanics, sound, optics, electricity, magnetism and Bohr theory; to build an organized body of knowledge relating to physical phenomena encountered in the student's life. Designed to meet the laboratory requirements for non-science majors and students in elementary education. Prerequisite: ELT 120; or MAT 080, MAT 081, MAT 106, or higher; or 2 years of high school algebra with a grades of ""C"" or higher; or appropriate mathematics placement score. Illinois Articulation Initiative (IAI): P1 900L Semester hour(s): 4 Lecture/Lab Hours: 3 lec, 2 lab/week